VIP20
本课程属于：015-MADYMO Occupant Safety Simulation Engineering English Technical Courses · 共 20 门相关课程，组合学习更完整。
查看所属VIP全部课程 →
← 返回所属目录 咨询 / 购买

MADYMO Multibody Crash Modeling and Validation

30 Chapters
View Course Samples Online
01
MADYMO in crash safety engineering
multibody vs. finite element approaches, solver architecture, and typical validation workflows.
MADYMOmultibody
02
Multibody system fundamentals for MADYMO
rigid bodies, joints, constraints, degrees of freedom, and equations of motion.
MultibodyMADYMO
03
MADYMO model setup
input file structure, system definition, body and joint cards, and initial conditions.
MADYMOstructure
04
Contact and impact modeling in MADYMO
contact types, penetration functions, friction, and energy absorption.
modelingMADYMO
05
Restraint system modeling
seat belts, airbags, pretensioners, load limiters, and their multibody representations.
Restraintmodeling
06
Dummy and human body models in MADYMO
Hybrid III, THOR, EuroSID, and facet occupant models.
MADYMOIII
07
Barrier and vehicle interface modeling
rigid walls, moving barriers, and prescribed motions for crash pulses.
interfacemodeling
08
Material and joint characteristics
nonlinear springs, dampers, hysteresis, and failure criteria in multibody context.
Materialcharacteristics
09
Simulation control and time integration
time step, solver settings, output frequency, and stability checks.
Simulationintegration
10
Post-processing and result extraction
occupant kinematics, injury criteria, and animation review in MADYMO.
Post-processingextraction
11
Validation fundamentals
correlation metrics, test data sources, and acceptance criteria for multibody crash models.
Validationcorrelation
12
Frontal impact validation
full frontal rigid barrier test setup, model correlation, and occupant response tuning.
validationcorrelation
13
Offset deformable barrier validation
modeling crushable barrier, vehicle pulse, and occupant restraint interaction.
deformablevalidation
14
Side impact validation
moving deformable barrier, door trim, side airbag, and ES-2re dummy response.
validationdeformable
15
Rear impact validation
seat structure, head restraint, BioRID dummy, and whiplash injury metrics.
validationstructure
16
Pedestrian protection validation
legform, upper legform, and headform impactors against vehicle front-end models.
Pedestrianprotection
17
Rollover and roof crush modeling
multibody approach for quasi-static and dynamic roof strength validation.
Rollovermodeling
18
Child restraint system validation
CRS models, ISOFIX/LATCH attachments, and Q-series dummy responses.
restraintvalidation
19
Out-of-position occupant modeling
airbag deployment interaction, proximity factors, and injury risk assessment.
Out-of-positionoccupant
20
Sensitivity analysis and robustness
parameter variation, DOE, and stochastic validation in MADYMO.
Sensitivityanalysis
21
Model calibration techniques
optimization, parameter identification, and inverse methods for crash validation.
calibrationtechniques
22
Coupling MADYMO with FE codes
co-simulation, hybrid III FE, and interface definitions for advanced validation.
CouplingMADYMO
23
Regulatory and consumer test protocols
FMVSS, ECE, Euro NCAP, and C-NCAP requirements for multibody models.
Regulatoryconsumer
24
Validation documentation and reporting
model verification, validation plan, and traceability matrix.
Validationdocumentation
25
Case study
frontal occupant restraint system validation from test to correlated MADYMO model.
occupantrestraint
26
Case study
side impact airbag and door trim validation using MADYMO multibody models.
validationMADYMO
27
Case study
pedestrian head impact validation with vehicle front-end and MADYMO headform model.
pedestrianvalidation
28
Case study
rear seat occupant protection validation for whiplash and seat belt performance.
occupantprotection
29
Advanced topics
active human body models, muscle activation, and pre-crash kinematics in MADYMO.
Advancedactivation
30
Capstone project
full vehicle crash validation using MADYMO multibody models, from setup to correlation report.
Capstonevalidation