VIP20
本课程属于：015-MADYMO Occupant Safety Simulation Engineering English Technical Courses · 共 20 门相关课程，组合学习更完整。
查看所属VIP全部课程 →
← 返回所属目录 咨询 / 购买

MADYMO Airbag Deployment and Occupant Interaction

30 Chapters
View Course Samples Online
01
Introduction to MADYMO for airbag deployment and occupant interaction
solver architecture, explicit time integration, and the role of MADYMO in occupant safety simulation.
MADYMOdeployment
02
Airbag modeling fundamentals in MADYMO
gas flow models, fabric material definitions, and the distinction between uniform pressure and Eulerian gas flow approaches.
modelingMADYMO
03
Occupant positioning and dummy models
Hybrid III, THOR, and human body models, seating setup, and initial kinematic conditions for airbag interaction studies.
Occupantpositioning
04
Airbag folding techniques in MADYMO
flat, rolled, and complex folds, fold line definitions, and their influence on deployment kinematics.
techniquesMADYMO
05
Inflator modeling and gas generation
pyrotechnic and hybrid inflators, mass flow rate curves, temperature effects, and tank test validation.
Inflatormodeling
06
Contact definition and penalty methods
airbag-to-occupant contact, self-contact of fabric, and contact stiffness calibration for stable simulation.
definitionairbag-to-occupant
07
Deployment simulation workflow
model assembly, time step control, output requests, and common convergence issues in MADYMO airbag simulations.
Deploymentsimulation
08
Validation of airbag deployment models
static deployment tests, high-speed video correlation, and pressure-time history comparison.
Validationdeployment
09
Occupant interaction with deploying airbag
out-of-position (OOP) scenarios, early contact, and injury risk assessment using MADYMO.
Occupantinteraction
10
Airbag venting and leakage modeling
vent hole definitions, porosity, gas leakage, and their effect on occupant deceleration.
modelingdefinitions
11
Driver airbag interaction with steering column
column collapse, tilt, and telescoping effects in MADYMO simulations.
interactionsteering
12
Passenger airbag deployment and windshield interaction
windshield contact, bag deflection, and occupant loading in frontal impacts.
Passengerdeployment
13
Side airbag and curtain airbag modeling
thorax and head protection, deployment timing, and interaction with interior trim.
modelingprotection
14
Knee airbag and pedestrian protection airbag
lower extremity interaction, knee bolster contact, and pedestrian head impact simulation.
pedestrianprotection
15
Advanced material models for airbag fabric
anisotropic hyperelasticity, strain rate effects, and failure criteria in MADYMO.
Advancedmaterial
16
Gas flow and thermal effects in airbag deployment
Eulerian and ALE methods, gas temperature, and pressure distribution inside the bag.
deploymentEulerian
17
Coupling MADYMO with other solvers
co-simulation with LS-DYNA, fluid-structure interaction, and multi-physics airbag modeling.
CouplingMADYMO
18
Occupant restraint system integration
seat belt, pretensioner, load limiter, and airbag interaction in MADYMO full-vehicle models.
Occupantrestraint
19
Design of experiments (DOE) and optimization for airbag systems
parameter studies, response surface methods, and MADYMO automation.
experimentsDOE
20
Regulatory and consumer test protocols
FMVSS 208, Euro NCAP, and China NCAP requirements for airbag deployment and occupant protection.
Regulatoryconsumer
21
Airbag deployment variability and robustness
manufacturing tolerances, temperature extremes, and stochastic simulation in MADYMO.
deploymentvariability
22
Out-of-position occupant simulation for side airbags
head and neck injury criteria, deployment timing, and mitigation strategies.
Out-of-positionoccupant
23
Child occupant and airbag interaction
rear-facing child seats, airbag suppression, and MADYMO modeling of child dummies.
occupantinteraction
24
Airbag deployment-induced injuries
skin abrasion, eye injury, and burn modeling using MADYMO contact and thermal outputs.
deployment-inducedinjuries
25
Post-crash airbag analysis
residual pressure, bag deflation, and occupant rebound in MADYMO simulations.
Post-crashanalysis
26
MADYMO scripting and automation
Python API, batch runs, parametric studies, and post-processing of airbag simulation results.
MADYMOscripting
27
Verification and validation (V&V) of airbag models
mesh convergence, energy balance, and comparison with physical tests.
Verificationvalidation
28
Case study
driver airbag OOP simulation in MADYMO, including model setup, simulation, and injury assessment.
OOPsimulation
29
Case study
side curtain airbag deployment and occupant interaction in a pole impact scenario using MADYMO.
deploymentoccupant
30
Future trends in airbag simulation
adaptive airbags, smart restraints, and integration of MADYMO with real-time simulation and AI-based optimization.
simulationadaptive