VIP20
本课程属于：015-MADYMO Occupant Safety Simulation Engineering English Technical Courses · 共 20 门相关课程，组合学习更完整。
查看所属VIP全部课程 →
← 返回所属目录 咨询 / 购买

MADYMO Child Restraint System Crash Simulation

30 Chapters
View Course Samples Online
01
Introduction to MADYMO for child restraint system crash simulation
overview of the software, its role in occupant safety, and key capabilities for CRS analysis.
MADYMOrestraint
02
Fundamentals of child restraint system design and regulation
ECE R44/R129, FMVSS 213, i-Size, and their implications for simulation.
restraintregulation
03
MADYMO model setup for CRS simulation
units, coordinate systems, input file structure, and essential keywords.
MADYMOCRS
04
Building a baseline CRS model
importing CAD geometry, defining belts, harnesses, and shell components.
Buildingbaseline
05
Child dummy models in MADYMO
Q-series, Hybrid III, and P-series dummies, their validation and positioning.
MADYMOQ-series
06
Material modeling for CRS components
plastics, foams, fabrics, and energy-absorbing materials under crash loading.
Materialmodeling
07
Contact definition and management in CRS simulations
dummy-to-CRS, CRS-to-vehicle, and self-contact.
definitionmanagement
08
Belt and harness modeling
slip, pretension, force-limiting, and routing for child seats.
modelingpretension
09
Frontal impact simulation of a CRS
setup, boundary conditions, and initial results interpretation.
simulationCRS
10
Side impact simulation of a CRS
door intrusion, head excursion, and energy absorption strategies.
simulationCRS
11
Rear impact and rollover considerations for CRS
specific challenges and modeling approaches.
rolloverconsiderations
12
Validation of CRS models against sled tests
correlation metrics, instrumentation, and model updating.
ValidationCRS
13
Parametric studies for CRS optimization
design variables, constraints, and DOE methods.
ParametricCRS
14
Optimization techniques in MADYMO
response surface, genetic algorithms, and multi-objective trade-offs.
Optimizationtechniques
15
Injury criteria for children
HIC, BrIC, chest deflection, and their application in CRS assessment.
criteriachildren
16
Advanced material models for CRS
hyperelasticity, viscoelasticity, and failure criteria.
Advancedmaterial
17
Simulation of ISOFIX and LATCH attachments
anchorages, release mechanisms, and load paths.
SimulationISOFIX
18
Modeling of inflatable CRS and airbag interactions
gas dynamics and fluid-structure coupling.
Modelinginflatable
19
Coupling MADYMO with other solvers
LS-DYNA co-simulation for vehicle structure and CRS interaction.
CouplingMADYMO
20
Sensitivity analysis and robustness assessment of CRS performance under variations.
Sensitivity analysis and robustness assessment of CRS performance under variations.
Sensitivityanalysis
21
Post-processing and visualization of CRS simulation results
animations, plots, and injury risk curves.
Post-processingvisualization
22
Case study
frontal crash simulation of a group 0+ infant seat with a Q0 dummy.
simulation
23
Case study
side impact simulation of a group 1 forward-facing seat with a Q3 dummy.
simulationforward-facing
24
Case study
booster seat simulation for group 2/3 with a Q6 dummy in frontal impact.
simulation
25
Case study
integrated CRS in vehicle seat development using MADYMO.
integratedCRS
26
Verification and quality assurance of CRS models
mesh quality, time step, and energy balance.
Verificationassurance
27
Regulatory compliance simulation
virtual testing for certification and homologation.
Regulatorycompliance
28
Emerging trends
autonomous driving, new seating positions, and their impact on CRS simulation.
Emergingautonomous
29
Best practices for efficient CRS simulation
model simplification, parallel computing, and automation.
practicesefficient
30
Capstone project
end-to-end simulation of a CRS design, from model build to optimization and reporting.
Capstoneend-to-end