VIP20
本课程属于：017-Advanced Automotive Airbag Modeling Engineering English Technical Courses · 共 20 门相关课程，组合学习更完整。
查看所属VIP全部课程 →
← 返回所属目录 咨询 / 购买

Out-of-Position Airbag Safety Simulation and Testing

30 Chapters
View Course Samples Online
01
Out-of-position airbag safety
regulatory landscape, FMVSS 208, and occupant protection objectives.
Out-of-positionregulatory
02
Airbag deployment physics
inflator output, bag kinematics, and interaction with occupants in close proximity.
deploymentinflator
03
OOP injury biomechanics
injury criteria, ATDs, and human body models for small-stature and child occupants.
OOPbiomechanics
04
OOP test matrix design
static and dynamic deployment tests, positioning fixtures, and worst-case scenarios.
OOPdeployment
05
Simulation workflow for OOP
CAD preparation, mesh generation, and model assembly in LS-DYNA or equivalent.
Simulationworkflow
06
Airbag modeling techniques
folded geometry, fabric material models, and inflator gas dynamics.
modelingtechniques
07
Occupant positioning and restraint interaction
pre-crash posture, seat belt routing, and out-of-position definitions.
Occupantpositioning
08
Contact algorithms and penalty methods for airbag-occupant interaction in explicit solvers.
Contact algorithms and penalty methods for airbag-occupant interaction in explicit solvers.
algorithmsairbag-occupant
09
Inflator characterization
tank tests, mass flow rate, and temperature effects for simulation input.
Inflatorcharacterization
10
Airbag fabric and seam modeling
orthotropic material properties, permeability, and failure criteria.
modelingorthotropic
11
Validation of OOP simulation models
component, subsystem, and full-scale test correlations.
ValidationOOP
12
ATD positioning and instrumentation for OOP tests
head, neck, chest, and abdomen response measurement.
ATDpositioning
13
Child occupant OOP scenarios
rear-facing infant seats, booster cushions, and interaction with side airbags.
occupantOOP
14
Driver-side OOP
steering wheel airbag deployment near the chest and head, and injury mitigation strategies.
Driver-sideOOP
15
Passenger-side OOP
dashboard-mounted airbag deployment and occupant proximity effects.
Passenger-sideOOP
16
Side airbag OOP
seat-mounted and curtain airbags, out-of-position occupants, and ejection mitigation.
OOPseat-mounted
17
Knee airbag and far-side OOP
lower extremity loading and interaction with interior trim.
far-sideOOP
18
Simulation of airbag deployment in confined spaces
contact with seat, door, and instrument panel.
Simulationdeployment
19
Fluid-structure interaction for airbag inflation
ALE, CEL, and particle methods.
Fluid-structureinteraction
20
Advanced material models for airbag fabrics
strain-rate effects, hysteresis, and damage evolution.
Advancedmaterial
21
Optimization of airbag design for OOP
venting, tethering, and adaptive inflation strategies.
OptimizationOOP
22
Sensor and algorithm development for OOP detection
occupant classification and position sensing.
algorithmdevelopment
23
Regulatory compliance simulation
FMVSS 208 OOP tests, dummy positioning, and pass/fail criteria.
Regulatorycompliance
24
Numerical stability and robustness in OOP simulations
time step, contact, and hourglass control.
Numericalstability
25
Post-processing and injury risk assessment
head injury criterion, chest deflection, and abdominal pressure.
Post-processingassessment
26
Case study
driver-side OOP simulation and validation against sled test data.
driver-sideOOP
27
Case study
passenger-side OOP with child ATD and comparison to FMVSS 208 requirements.
passenger-sideOOP
28
Case study
side airbag OOP simulation for a small female occupant.
OOPsimulation
29
Emerging trends
virtual testing, digital twins, and machine learning for OOP safety optimization.
EmergingOOP
30
Capstone project
end-to-end OOP simulation and test correlation for a production airbag system.
Capstoneend-to-end