VIP20
本课程属于：016-PAM-CRASH Automotive Simulation Engineering English Technical Courses · 共 20 门相关课程，组合学习更完整。
查看所属VIP全部课程 →
← 返回所属目录 咨询 / 购买

PAM-CRASH Seatbelt Modeling and Occupant Protection

30 Chapters
View Course Samples Online
01
Introduction to PAM-CRASH for occupant safety
solver architecture, explicit time integration, and the role of seatbelt modeling in crashworthiness.
PAM-CRASHoccupant
02
Seatbelt system components and working principles
retractor, pretensioner, load limiter, buckle, anchor points, and webbing mechanics.
Seatbeltcomponents
03
Overview of seatbelt modeling approaches in PAM-CRASH
lumped-parameter vs. finite element belt representations and selection criteria.
seatbeltmodeling
04
Belt element formulation in PAM-CRASH
seatbelt element types, slip ring definitions, and tension-only behavior.
formulationPAM-CRASH
05
Material modeling for seatbelt webbing
elastic, plastic, strain-rate dependent, and failure criteria for belt materials.
Materialmodeling
06
Geometry and mesh generation for seatbelts
routing, initial slack, folding, and pre-simulation positioning.
Geometrygeneration
07
Retractor modeling in PAM-CRASH
locking mechanisms, spool inertia, and belt pay-out/retraction control.
Retractormodeling
08
Pretensioner modeling
pyrotechnic and mechanical pretensioners, activation timing, and belt pull-in implementation.
Pretensionermodeling
09
Load limiter modeling
torsion bar, friction-based, and adaptive load limiters with force-displacement characteristics.
modelingfriction-based
10
Slip ring and belt routing
friction coefficients, contact definitions, and their effect on belt force distribution.
frictioncoefficients
11
Belt-to-occupant coupling
dummy positioning, belt-to-dummy contact, and penetration control in PAM-CRASH.
Belt-to-occupantcoupling
12
Belt-to-seat and belt-to-vehicle interaction
anchor point modeling, seat structure deformation, and belt routing through trim.
Belt-to-seatbelt-to-vehicle
13
Occupant dummy models in PAM-CRASH
Hybrid III, THOR, and EuroSID dummy setup for seatbelt loading scenarios.
OccupantPAM-CRASH
14
Frontal impact seatbelt simulation
full frontal rigid barrier and offset deformable barrier test setups with belt modeling.
seatbeltsimulation
15
Side impact and seatbelt interaction
belt behavior in lateral loading, far-side occupant protection, and belt geometry effects.
seatbeltinteraction
16
Rear impact and seatbelt performance
whiplash protection, belt slack management, and seatback interaction.
seatbeltperformance
17
Rollover and seatbelt retention
belt modeling for occupant containment, roof crush interaction, and ejection mitigation.
Rolloverseatbelt
18
Out-of-position (OOP) occupant simulations
belt interaction with airbag, deployment timing, and injury risk assessment.
Out-of-positionOOP
19
Belt force limiting and occupant injury criteria
chest deflection, HIC, Nij, and their relation to belt load characteristics.
limitingoccupant
20
Pretensioner and load limiter tuning
parametric studies, design of experiments, and optimization workflows in PAM-CRASH.
Pretensionerparametric
21
Belt slip and friction calibration
experimental validation, coefficient of friction determination, and sensitivity analysis.
frictioncalibration
22
Seatbelt model validation
component-level tests, sled tests, and full vehicle crash test correlation.
Seatbeltvalidation
23
Advanced belt materials
high-strength webbing, energy-absorbing stitches, and their constitutive modeling in PAM-CRASH.
Advancedmaterials
24
Multi-body and FE coupling for seatbelt simulation
rigid body belts, hybrid approaches, and computational efficiency.
Multi-bodycoupling
25
Seatbelt modeling for electric and autonomous vehicles
new interior layouts, rotated seats, and alternative restraint geometries.
Seatbeltmodeling
26
Child restraint system (CRS) and seatbelt interaction
belt routing through CRS, ISOFIX, and occupant protection simulation.
restraintCRS
27
Seatbelt modeling for pedestrian and cyclist protection
belt-like restraints in active safety systems and wearable airbags.
Seatbeltmodeling
28
Automation and scripting in PAM-CRASH for seatbelt modeling
Python APIs, batch processing, and model parameterization.
Automationscripting
29
Verification and quality checks for seatbelt models
energy balance, hourglass control, time step, and contact stability.
Verificationseatbelt
30
Case study
full vehicle frontal crash with seatbelt optimization—from model setup to injury criteria evaluation and design recommendations.
seatbeltoptimization