VIP20
本课程属于：010-Occupant Restraint Program Management English Technical Courses · 共 20 门相关课程，组合学习更完整。
查看所属VIP全部课程 →
← 返回所属目录 咨询 / 购买

End-to-End Airbag System Development Program Management

30 Chapters
View Course Samples Online
01
Airbag system program landscape
occupant safety regulations, OEM and Tier 1 roles, and end-to-end development lifecycle.
landscapeoccupant
02
Program initiation and chartering
customer RFQ analysis, statement of work, deliverables, and cross-functional team setup.
initiationchartering
03
Requirements engineering for airbag systems
regulatory, customer, and internal requirements decomposition and traceability.
Requirementsregulatory
04
System architecture and partitioning
airbag ECU, sensors, inflators, modules, wiring, and diagnostic interfaces.
architecturepartitioning
05
Concept design and trade studies
airbag module placement, inflator selection, and restraint performance targets.
placementinflator
06
Design FMEA and safety concept
hazard analysis, functional safety, and risk mitigation for airbag deployment.
FMEAanalysis
07
CAE and simulation-driven design
crash simulation, occupant modeling, and airbag deployment kinematics.
CAEsimulation-driven
08
Airbag module design and packaging
housing, cushion, inflator, and trim integration for production vehicles.
packaginginflator
09
Inflator and propellant engineering
pyrotechnic and hybrid inflator principles, output characterization, and aging.
Inflatorpropellant
10
Sensor and ECU integration
crash sensors, safing logic, deployment algorithms, and communication buses.
ECUintegration
11
Electrical and wiring harness design
connectors, squib circuits, shielding, and EMC considerations.
Electricalconnectors
12
Software development for airbag ECUs
calibration, diagnostics, OBD, and software release management.
Softwaredevelopment
13
Design verification planning
DVP&R, test matrix, sample sizes, and acceptance criteria.
verificationplanning
14
Physical testing
sled tests, component tests, environmental tests, and data acquisition.
Physicalcomponent
15
Full-vehicle crash testing
test setup, instrumentation, occupant injury criteria, and correlation with CAE.
Full-vehicleinstrumentation
16
Airbag deployment and out-of-position testing
static deployment, OOP, and low-risk deployment requirements.
deploymentout-of-position
17
Supplier and sub-tier management
inflator, sensor, and textile suppliers, PPAP, and quality planning.
Suppliersub-tier
18
Manufacturing and assembly
airbag module production, line setup, poka-yoke, and end-of-line testing.
Manufacturingassembly
19
Quality management and APQP
control plans, MSA, SPC, and continuous improvement for airbag systems.
managementAPQP
20
Change management and configuration control
ECR/ECO, BOM management, and traceability across the program.
managementconfiguration
21
Program scheduling and milestones
timing plans, gate reviews, and critical path management.
schedulingmilestones
22
Cost engineering and budgeting
should-cost, cost breakdown, investment planning, and profitability analysis.
budgetingshould-cost
23
Risk management
risk register, mitigation strategies, and contingency planning for airbag programs.
managementregister
24
Homologation and regulatory compliance
FMVSS, ECE, GB, and other global airbag regulations.
Homologationregulatory
25
Customer interface and reporting
design reviews, status reports, and escalation management.
Customerinterface
26
Launch readiness and production ramp-up
PPAP, run-at-rate, safe launch, and field quality monitoring.
readinessproduction
27
Field data and warranty management
airbag deployment data, warranty analysis, and corrective actions.
warrantymanagement
28
Lessons learned and continuous improvement
post-program reviews, knowledge management, and best practices.
continuousimprovement
29
Emerging trends
advanced airbag systems, autonomous vehicle interiors, and new inflator technologies.
Emergingadvanced
30
Capstone program simulation
end-to-end management of an airbag development program from concept to launch.
Capstonesimulation