VIP20
本课程属于：004-Automotive Occupant Safety and Crashworthiness Engineering English Technical Courses · 共 20 门相关课程，组合学习更完整。
查看所属VIP全部课程 →
← 返回所属目录 咨询 / 购买

FMVSS Occupant Protection Compliance Engineering

30 Chapters
View Course Samples Online
01
FMVSS occupant protection regulatory framework
FMVSS 208, 207, 206, 201, 216, 226, and related standards; compliance engineering scope and vehicle certification pathways.
FMVSSoccupant
02
Occupant protection performance metrics
HIC, chest deflection, Nij, femur load, head excursion, and injury assessment reference values (IARVs) for crash test dummies.
Occupantprotection
03
Anthropomorphic test devices (ATDs)
Hybrid III 50th percentile male, 5th percentile female, THOR, WorldSID, and child restraint air bag interaction (CRABI) dummy setup and instrumentation.
AnthropomorphicATDs
04
Sled test and full-scale crash test facilities
acceleration sled, deceleration sled, frontal barrier, offset deformable barrier, side impact moving deformable barrier, and pole test configurations.
full-scalefacilities
05
Frontal impact compliance engineering
FMVSS 208 unbelted and belted test requirements, 25 mph and 30 mph rigid barrier tests, and occupant restraint system design.
complianceFMVSS
06
Air bag system design for FMVSS 208
frontal air bag deployment timing, suppression, low-risk deployment (LRD), and occupant classification system (OCS) integration.
FMVSSdeployment
07
Seat belt assembly compliance
FMVSS 209 and 210 requirements, anchorage strength, webbing performance, buckle release force, and pretensioner/load limiter design.
assemblycompliance
08
Seat system structural integrity
FMVSS 207 seat anchorage, FMVSS 202 head restraint, and seat back moment strength for occupant retention.
structuralintegrity
09
Side impact occupant protection
FMVSS 214 requirements, moving deformable barrier test, side pole test, and side air bag/curtain air bag deployment strategies.
occupantprotection
10
Roof crush resistance
FMVSS 216 and 216a test procedure, roof strength-to-weight ratio, and structural countermeasures for rollover occupant protection.
resistanceFMVSS
11
Ejection mitigation
FMVSS 226 requirements, side curtain air bag coverage, laminated glazing, and occupant retention during rollover and side impact.
Ejectionmitigation
12
Child restraint systems
FMVSS 213 compliance, LATCH (FMVSS 225) anchorage, child seat installation, and CRABI dummy testing for air bag interaction.
restraintFMVSS
13
Occupant protection in electric and autonomous vehicles
battery pack intrusion, seat orientation flexibility, and interior design challenges for FMVSS compliance.
Occupantprotection
14
CAE simulation for occupant protection
LS-DYNA, PAM-CRASH, and Radioss modeling of ATDs, air bags, seat belts, and structural deformation.
CAEsimulation
15
Validation and correlation of CAE models
sled test correlation, full-scale crash test validation, and model updating for FMVSS compliance prediction.
Validationcorrelation
16
Design of experiments (DOE) and optimization for occupant protection
parametric studies, response surface methodology, and robust design for FMVSS targets.
experimentsDOE
17
Restraint system tuning
air bag pressure, venting, tethering, seat belt force limiting, and pretensioner timing for injury metric optimization.
Restraintpressure
18
Occupant packaging and interior safety
steering column, instrument panel, knee bolster, and energy-absorbing trim design for FMVSS 208 and 201.
Occupantpackaging
19
FMVSS 201 interior impact protection
head impact, free motion headform, and instrument panel/knee bolster energy absorption requirements.
FMVSSinterior
20
FMVSS 206 door locks and door retention
side door strength, sliding door requirements, and occupant containment in side impacts.
FMVSSretention
21
FMVSS 207/208 seat and anchorage interaction
seat track strength, recliner performance, and occupant kinematics during frontal and rear impacts.
FMVSSanchorage
22
Rear impact occupant protection
FMVSS 202a head restraint, seat back strength, and whiplash mitigation strategies.
occupantprotection
23
Rollover occupant protection
FMVSS 216 roof crush, FMVSS 226 ejection mitigation, and seat belt effectiveness in rollover crashes.
Rolloveroccupant
24
Compliance testing and certification
test matrix development, witness testing, documentation, and NHTSA compliance audit preparation.
Compliancecertification
25
Regulatory compliance for global markets
UNECE R94, R95, R16, R17, and harmonization with FMVSS for occupant protection.
Regulatorycompliance
26
Advanced restraint technologies
adaptive air bags, motorized seat belts, active head restraints, and integrated safety systems for FMVSS compliance.
Advancedrestraint
27
Occupant protection for diverse populations
5th percentile female, elderly, obese, and out-of-position occupants in FMVSS test protocols.
Occupantprotection
28
Crash test data analysis
filtering, injury criteria calculation, high-speed video analysis, and post-test inspection for compliance reporting.
analysisfiltering
29
Failure mode and effects analysis (FMEA) for occupant protection systems
identifying compliance risks, design validation, and corrective actions.
analysisFMEA
30
Future trends in FMVSS occupant protection
automated driving, interior reconfiguration, new ATDs, and regulatory updates for emerging vehicle architectures.
FMVSSoccupant