VIP20
本课程属于：004-Automotive Occupant Safety and Crashworthiness Engineering English Technical Courses · 共 20 门相关课程，组合学习更完整。
查看所属VIP全部课程 →
← 返回所属目录 咨询 / 购买

Euro NCAP Crash Safety Assessment and Engineering Validation

30 Chapters
View Course Samples Online
01
Euro NCAP overview
mission, history, governance, and the annual rating roadmap.
NCAPgovernance
02
Rating architecture
star ratings, overall score, and the four assessment pillars.
architectureassessment
03
Vehicle segmentation and applicability
M1, N1, and special-purpose vehicle categories.
segmentationapplicability
04
Test facility requirements
sled, barrier, and full-scale crash laboratory capabilities.
facilityrequirements
05
Frontal impact assessment
offset deformable barrier (ODB) test setup and injury criteria.
assessmentdeformable
06
Frontal impact assessment
full-width rigid barrier (FWRB) test and restraint system evaluation.
assessmentfull-width
07
Mobile progressive deformable barrier (MPDB) test
compatibility, barrier design, and scoring.
progressivedeformable
08
Side impact assessment
AE-MDB barrier, test configuration, and occupant protection metrics.
assessmentAE-MDB
09
Side pole impact
pole geometry, impact angle, and head injury protection.
geometryprotection
10
Far-side impact
occupant kinematics, restraint countermeasures, and scoring.
Far-sideoccupant
11
Rear impact and whiplash
seat and head restraint evaluation, BioRID dummy, and rating.
whiplashrestraint
12
Pedestrian protection
headform, legform, and upper legform impactors, and test grid.
Pedestrianprotection
13
Cyclist and vulnerable road user (VRU) protection
test scenarios and assessment protocols.
vulnerableVRU
14
Active safety and ADAS
AEB, LKA, and emergency lane keeping test procedures.
ADASAEB
15
AEB pedestrian and cyclist scenarios
test setup, target specifications, and scoring.
AEBpedestrian
16
AEB car-to-car scenarios
rear-end, turning, and crossing test cases.
AEBcar-to-car
17
Occupant status monitoring
seat belt reminder, occupant detection, and child presence detection.
Occupantmonitoring
18
Child occupant protection
CRS installation, ISOFIX, i-Size, and dynamic test evaluation.
occupantprotection
19
Rescue and extrication
post-crash door opening, eCall, and emergency response assessment.
extricationpost-crash
20
Dummy instrumentation and calibration
Hybrid III, THOR, WorldSID, and BioRID.
instrumentationcalibration
21
Injury criteria and biomechanical limits
HIC, BrIC, chest deflection, and pelvic force.
criteriabiomechanical
22
Data acquisition and signal processing
accelerometers, load cells, and filtering per SAE J211.
acquisitionprocessing
23
Test repeatability and reproducibility
tolerances, calibration, and quality control.
repeatabilityreproducibility
24
Virtual testing and simulation
CAE correlation, model validation, and Euro NCAP acceptance.
simulationCAE
25
Vehicle preparation and test execution
ballast, fuel, tire pressure, and on-board cameras.
preparationexecution
26
Scoring and rating calculation
pillar scores, weighted totals, and star rating thresholds.
calculationweighted
27
Engineering validation workflow
from concept to physical test and certification.
validationworkflow
28
Design countermeasures
crumple zones, side structures, airbags, and seat belt technologies.
countermeasuresstructures
29
Case study
engineering a 5-star small family car under 2023–2025 protocols.
protocols
30
Future directions
2026+ roadmap, automated driving, and new assessment priorities.
directionsautomated