VIP20
本课程属于：024-Occupant Protection and Crashworthiness Development English Technical Courses · 共 20 门相关课程，组合学习更完整。
查看所属VIP全部课程 →
← 返回所属目录 咨询 / 购买

Human Body Model Injury Mechanisms for Design Decisions

30 Chapters
View Course Samples Online
01
Introduction to human body models in injury biomechanics
role in design decisions, model types (FE, multibody, statistical), and validation hierarchy.
biomechanicsdecisions
02
Injury mechanisms and tolerances
strain-based, stress-based, acceleration-based criteria, and their translation into design constraints.
mechanismstolerances
03
Anthropometry and material properties for HBM development
scaling laws, tissue characterization, and population variability.
Anthropometrymaterial
04
Finite element modeling of the human body
mesh generation, element types, hourglass control, and contact definitions for impact simulations.
modelinggeneration
05
Material models for biological tissues
hyperelasticity, viscoelasticity, failure criteria, and calibration against experimental data.
Materialbiological
06
Head injury mechanisms
skull fracture, concussion, diffuse axonal injury, and criteria (HIC, CSDM) for helmet and interior design.
mechanismsfracture
07
Brain tissue modeling
constitutive models, white matter anisotropy, and simulation of traumatic brain injury under rotational loading.
modelingconstitutive
08
Neck injury mechanisms
whiplash, facet joint loading, and ligament failure criteria for seat and headrest design.
mechanismswhiplash
09
Thoracic injury mechanisms
rib fracture, lung contusion, aortic rupture, and criteria (TTI, VC) for restraint system optimization.
Thoracicmechanisms
10
Abdominal injury mechanisms
solid organ laceration, hollow organ rupture, and criteria for seatbelt and airbag design.
Abdominalmechanisms
11
Pelvis and lower extremity injury mechanisms
pelvic fracture, hip dislocation, knee ligament injury, and criteria for vehicle interior design.
extremitymechanisms
12
Upper extremity injury mechanisms
fracture and dislocation patterns relevant to airbag interaction and occupant protection.
extremitymechanisms
13
Spine injury mechanisms
vertebral fracture, disc injury, spinal cord injury, and load paths in compression, flexion, and extension.
mechanismsvertebral
14
Pedestrian and cyclist injury mechanisms
lower limb, head, and torso impact scenarios for vehicle front-end design.
Pedestrianmechanisms
15
Occupant protection in frontal crashes
restraint system design using HBM simulations, airbag tuning, and belt geometry optimization.
Occupantprotection
16
Occupant protection in side impacts
door trim, side airbag, and seat design using HBM for thoracic and pelvic injury reduction.
Occupantprotection
17
Rear impact and whiplash protection
seat design, head restraint geometry, and HBM-based evaluation of neck injury risk.
whiplashprotection
18
Rollover and roof crush
HBM simulation of head and neck loading, roof strength design, and restraint performance.
RolloverHBM
19
Child occupant safety
scaling of HBM, child restraint system design, and injury mechanisms specific to pediatric populations.
occupantHBM
20
Elderly occupant safety
age-related material property changes, fracture risk, and design adaptations for older occupants.
occupantage-related
21
Blast and ballistic injury mechanisms
primary blast lung injury, fragment penetration, and HBM application in protective equipment design.
ballisticmechanisms
22
Sports injury mechanisms
concussion, ligament injury, and equipment design using HBM for helmets, pads, and footwear.
mechanismsconcussion
23
Human body model validation
cadaver, animal, and volunteer data, correlation metrics, and uncertainty quantification.
validationvolunteer
24
Sensitivity analysis and robustness in HBM-based design
parametric studies, DOE, and surrogate modeling for design optimization.
Sensitivityanalysis
25
Coupling HBM with active human models
muscle activation, reflex response, and pre-crash positioning for restraint design.
CouplingHBM
26
Real-time HBM and hardware-in-the-loop
reduced-order models, model order reduction, and integration with vehicle simulators.
Real-timeHBM
27
Injury risk curves and probabilistic design
statistical methods, logistic regression, and reliability-based design optimization.
probabilisticstatistical
28
Regulatory and consumer testing
FMVSS, Euro NCAP, IIHS, and how HBM simulations support compliance and rating targets.
Regulatoryconsumer
29
Case study
HBM-driven design of a vehicle seat for whiplash and rear-impact protection.
HBM-drivenwhiplash
30
Case study
HBM-based optimization of a pedestrian protection system for lower limb and head injury mitigation.
HBM-basedoptimization