VIP20
本课程属于：023-Automotive Safety Regulations and NCAP Assessment English Technical Courses · 共 20 门相关课程，组合学习更完整。
查看所属VIP全部课程 →
← 返回所属目录 咨询 / 购买

Q-Series Child Dummy Injury Channel Assessment for NCAP

30 Chapters
View Course Samples Online
01
Q-Series child dummy family overview
Q0, Q1, Q1.5, Q3, Q6, Q10 variants, anthropometry, and their role in NCAP child occupant protection assessment.
Q-Seriesvariants
02
Injury channel architecture in Q-Series dummies
sensor locations, measurement chains, and channel definitions for head, neck, chest, abdomen, and pelvis.
architectureQ-Series
03
NCAP protocols and injury channel requirements
relevant Euro NCAP, C-NCAP, and other consumer rating programs, test configurations, and channel-specific pass/fail criteria.
NCAPprotocols
04
Head injury channel assessment
acceleration measurement, HIC calculation, head impact criteria, and data processing for Q-Series head channels.
assessmentacceleration
05
Neck injury channel assessment
neck force and moment measurements, Nij calculation, tension/compression limits, and flexion/extension criteria for child dummies.
assessmentmeasurements
06
Chest injury channel assessment
chest acceleration, deflection measurement (where applicable), and compression criteria for Q-Series chest channels.
assessmentacceleration
07
Abdomen and pelvis injury channel assessment
abdominal pressure, penetration, and pelvic force measurements, and associated injury criteria for child occupants.
assessmentabdominal
08
Sensor calibration and verification for Q-Series injury channels
calibration procedures, frequency response, and channel integrity checks before testing.
calibrationverification
09
Data acquisition setup for Q-Series channels
sampling rates, anti-aliasing filters, channel scaling, and synchronization with test events.
acquisitionQ-Series
10
Signal processing and filtering for injury channel data
CFC filters, ISO 6487 requirements, and channel-specific filtering per NCAP protocols.
processingfiltering
11
Injury channel data validation and quality control
outlier detection, channel saturation checks, and plausibility assessment for Q-Series measurements.
validationdetection
12
Test setup and dummy positioning for injury channel assessment
seating procedures, belt routing, and installation effects on channel readings.
positioningassessment
13
Frontal impact test scenarios for Q-Series injury channel assessment
full-width and offset deformable barrier tests, channel response characteristics, and NCAP evaluation.
scenariosQ-Series
14
Side impact test scenarios for Q-Series injury channel assessment
barrier and pole tests, channel-specific loading, and injury criteria evaluation.
scenariosQ-Series
15
Rear impact and whiplash considerations for child dummies
channel relevance, measurement challenges, and NCAP assessment where applicable.
whiplashconsiderations
16
Injury channel assessment in child restraint system (CRS) evaluation
CRS types, installation methods, and channel-specific performance in NCAP tests.
assessmentrestraint
17
Channel-specific injury risk curves and interpretation
translating measured channels into injury probability and NCAP scoring.
Channel-specificinterpretation
18
Comparative analysis of Q-Series channels across dummy sizes
scaling effects, channel sensitivity, and size-specific injury criteria.
Comparativeanalysis
19
Channel data reporting and documentation for NCAP
required channel outputs, formatting, and traceability in test reports.
reportingdocumentation
20
Practical exercise
processing head acceleration data from a Q-Series frontal impact test and calculating HIC according to NCAP protocols.
exerciseprocessing
21
Practical exercise
evaluating neck Nij from Q-Series neck force and moment channels in a side impact test.
exerciseevaluating
22
Practical exercise
assessing chest acceleration and compression channels for a Q3 dummy in a frontal NCAP test.
exerciseassessing
23
Practical exercise
analyzing abdomen and pelvis channels from a Q6 dummy in a side impact pole test.
exerciseanalyzing
24
Troubleshooting common channel issues
noise, drift, saturation, and mounting errors in Q-Series injury channel measurements.
Troubleshootingsaturation
25
Channel assessment for advanced CRS features
impact shields, load legs, and their influence on Q-Series injury channels in NCAP tests.
assessmentadvanced
26
Influence of test environment and boundary conditions on injury channels
seat properties, temperature, and their effects on Q-Series measurements.
Influenceenvironment
27
Channel data correlation with physical dummy inspection
post-test dummy inspection, damage assessment, and channel consistency checks.
correlationphysical
28
Automation and scripting for injury channel assessment
batch processing, automated criteria calculation, and report generation for NCAP tests.
Automationscripting
29
Case study
full NCAP frontal test with Q-Series dummies—channel data review, criteria evaluation, and rating outcome.
NCAPQ-Series
30
Case study
side impact NCAP test with Q-Series dummies—channel-specific challenges, data interpretation, and lessons learned.
NCAPQ-Series