VIP20
本课程属于：008-Advanced Occupant Restraint System Engineering English Technical Courses · 共 20 门相关课程，组合学习更完整。
查看所属VIP全部课程 →
← 返回所属目录 咨询 / 购买

Oblique Impact Restraint Design and Occupant Kinematics

30 Chapters
View Course Samples Online
01
Oblique impact fundamentals
defining oblique loading, impact angle, and delta-v vectors in crash safety.
defining
02
Occupant kinematics in oblique crashes
head, thorax, and pelvis motion under combined frontal-lateral loading.
Occupantkinematics
03
Regulatory and consumer test protocols
FMVSS 208 oblique pole, Euro NCAP far-side, and IIHS oblique sled requirements.
Regulatoryconsumer
04
Restraint system architecture for oblique impact
seatbelts, airbags, and seat structures as an integrated system.
Restraintarchitecture
05
Seatbelt geometry and load paths
pretensioners, load limiters, and anchor placement for oblique restraint.
Seatbeltgeometry
06
Airbag deployment strategies
frontal, side, and curtain airbags in oblique and small overlap crashes.
deploymentstrategies
07
Occupant classification and sensing
weight, position, and crash severity inputs for adaptive restraint deployment.
Occupantclassification
08
Biomechanical injury criteria
HIC, BrIC, chest deflection, and pelvic metrics in oblique loading.
Biomechanicalcriteria
09
ATD selection and instrumentation
THOR, WorldSID, and Hybrid III for oblique impact testing.
ATDselection
10
Sled testing for oblique impact
pulse generation, buck design, and repeatability considerations.
generationrepeatability
11
Finite element modeling of oblique impact
LS-DYNA and PAM-CRASH model setup and validation.
modelingLS-DYNA
12
Restraint optimization using DOE
parameter screening, response surface methods, and robustness.
Restraintoptimization
13
Far-side occupant protection
kinematics, restraint challenges, and countermeasures.
Far-sideoccupant
14
Near-side oblique impact
door trim, armrest, and side airbag interactions.
Near-sideinteractions
15
Seatbelt slip and migration in oblique loading
causes, consequences, and design mitigations.
Seatbeltmigration
16
Pretensioner and load limiter tuning for oblique impact energy management.
Pretensioner and load limiter tuning for oblique impact energy management.
Pretensionermanagement
17
Airbag venting and tethering
controlling deployment force and coverage for oblique engagement.
tetheringcontrolling
18
Seat structure and recliner performance under oblique loading
strength, stiffness, and deformation modes.
structurerecliner
19
Occupant compartment integrity
steering column, instrument panel, and knee bolster behavior in oblique crashes.
Occupantcompartment
20
Child occupant safety in oblique impacts
CRS performance, side impact, and tether anchorage.
occupantCRS
21
Out-of-position occupant scenarios
airbag interaction and injury risk in oblique deployment.
Out-of-positionoccupant
22
Advanced restraint technologies
active seatbelts, pre-crash positioning, and adaptive airbag systems.
Advancedrestraint
23
Human body models for oblique impact
THUMS and GHBMC applications in restraint design.
THUMSGHBMC
24
Data acquisition and analysis
accelerometers, load cells, high-speed video, and signal processing.
acquisitionanalysis
25
Validation and verification
correlating physical tests with CAE simulations for oblique impact.
Validationverification
26
Design of experiments for restraint system calibration
factors, levels, and response metrics.
experimentsrestraint
27
Case study
small overlap frontal impact – restraint performance and occupant kinematics.
restraintperformance
28
Case study
oblique pole side impact – airbag and seatbelt interaction with ATD response.
seatbeltinteraction
29
Case study
far-side occupant protection – restraint system modifications and evaluation.
far-sideoccupant
30
Future trends and emerging challenges
autonomous vehicle interiors, new seating configurations, and oblique impact safety.
emergingchallenges